Forklift evaluation form: free printable operator evaluation
A printable forklift operator evaluation form you can use today. It records why the evaluation is happening, what the evaluator watched the operator do on the truck and in your workplace, the result, and the certification 29 CFR 1910.178(l)(6) requires: the operator's name, the date of training, the date of evaluation, and who trained and evaluated them.
US Letter, no email, no account.
What is on the forklift evaluation form
The form has a header for the operator, the truck and the evaluator, a reason for the evaluation, 20 observed skills in 5 groups rated satisfactory, needs training or not applicable, a result, and the certification block.
Observed skills
01Inspection before use
- Completes the pre-use inspection of the truck and reports defects instead of operating
- Checks forks, chains, mast, tires, horn, lights, brakes and steering
- Confirms the data plate is legible and knows the truck's rated capacity
02Truck-related operation
- Mounts and dismounts using three points of contact, and wears the seat belt where fitted
- Uses controls and instruments correctly and smoothly
- Steers and maneuvers under control, at a speed suited to conditions
- Keeps a clear view of the direction of travel, and travels in reverse when the load blocks the view
- Stays within rated capacity and keeps the load stable
- Follows the operating instructions and warnings for this type of truck
03Load handling
- Approaches the load squarely, sets fork spread, and inserts forks fully
- Travels with the load low and tilted back
- Stacks and unstacks at height with the truck stopped and the mast vertical
- Recognizes an unstable or damaged load and does not move it
04Workplace conditions
- Yields to pedestrians, sounds the horn at intersections and blind corners
- Works safely in narrow aisles and restricted places
- Travels ramps and grades with the load upgrade, and never turns on a grade
- Adjusts for surface conditions such as wet floors, debris, and dock plates
- Observes any hazardous locations and other conditions unique to this workplace
05Parking and shutdown
- Lowers forks fully, neutralizes controls, sets the brake and shuts off power
- Parks clear of aisles, exits and fire equipment, and removes the key where required
Certification block
- Operator name
- Date of training
- Date of this evaluation
- Trained by (name)
- Evaluated by (name and title)
- Next evaluation due (no later than)
- Operator signature
- Evaluator signature
When a forklift operator must be evaluated
Before operating without supervision, and then at least once every 3 years under 29 CFR 1910.178(l)(4)(iii). Refresher training, and an evaluation to confirm it worked, is also required under 29 CFR 1910.178(l)(4)(ii) when any of these happens:
- Observed operating the truck in an unsafe manner
- Involved in an accident or a near miss
- Previous evaluation revealed unsafe operation
- Assigned to a different type of truck
- Workplace conditions changed in a way that could affect safe operation
To see which of your operators are past the three-year date, paste your roster into the free forklift operator evaluation scheduler.
For the other records a procedure needs, such as training sign-off and revision history, see our SOP forms.
The regulation behind the form
Each part of the form maps to a paragraph of the powered industrial truck standard, 29 CFR 1910.178(l), operator training.
- 29 CFR 1910.178(l)(2), Powered industrial trucks: training program implementation
- Training must consist of a combination of formal instruction such as lecture, discussion, written material, or video, practical training through demonstrations and exercises performed by the trainee, and an evaluation of the operator's performance in the workplace. All training and evaluation must be conducted by a person with the knowledge, training, and experience to train operators and evaluate their competence.
- 29 CFR 1910.178(l)(3), Powered industrial trucks: training program content
- Training must cover truck-related topics, including operating instructions and warnings for the type of truck operated, controls and instrumentation, steering and maneuvering, visibility, capacity, stability, and inspection and maintenance, and workplace-related topics, including surface conditions, load composition and stability, load manipulation and stacking, pedestrian traffic, narrow aisles and restricted places, ramps and sloped surfaces, hazardous locations, and any other unique conditions in the workplace.
- 29 CFR 1910.178(l)(4), Powered industrial trucks: refresher training and evaluation
- Refresher training in the relevant topics must be provided when the operator has been observed operating the truck in an unsafe manner, has been involved in an accident or a near miss, has received an evaluation revealing unsafe operation, is assigned to a different type of truck, or when workplace conditions change in a manner that could affect safe operation. An evaluation of each operator's performance must be conducted at least once every three years.
- 29 CFR 1910.178(l)(6), Powered industrial trucks: certification
- The employer must certify that each operator has been trained and evaluated as required. The certification must include the name of the operator, the date of the training, the date of the evaluation, and the identity of the person or persons performing the training or evaluation.
Source: eCFR, 29 CFR 1910.178, powered industrial trucks. This form is informational and not legal advice.
Forklift templates that go with the form
The evaluation is the last step of an operator training program. These SOPs in the library cover the rest of it.
- Forklift Operator Training and Certification
- Forklift Pre-Shift Inspection
- Forklift and Pedestrian Traffic Safety
14-day free trial, no credit card. Launch pricing.
Forklift evaluation form questions
- How often does OSHA require a forklift operator evaluation?
- At least once every three years under 29 CFR 1910.178(l)(4)(iii), and sooner after any of the refresher triggers in (l)(4)(ii): the operator is seen operating unsafely, is involved in an accident or near miss, receives an evaluation revealing unsafe operation, is assigned a different type of truck, or workplace conditions change in a way that could affect safe operation.
- Who can perform a forklift evaluation?
- A person with the knowledge, training, and experience to train powered industrial truck operators and evaluate their competence, as 29 CFR 1910.178(l)(2) requires. It can be someone on your own staff; the standard sets the qualification, not an outside certification.
- What has to be on a forklift operator certification?
- 29 CFR 1910.178(l)(6) requires the employer to certify that each operator has been trained and evaluated, and the certification must include the operator's name, the date of the training, the date of the evaluation, and the identity of the person or persons performing the training or evaluation. The certification block on this form carries those four facts.
- Does the evaluation have to happen on the operator's own truck?
- The evaluation is of the operator's performance in the workplace, under 29 CFR 1910.178(l)(2), and training covers the type of truck the operator will use. Evaluate on that type of truck, in the areas where it is actually driven, and evaluate again when the operator is assigned a different type.
- Is this form enough to be OSHA compliant?
- No form is compliance on its own. The evaluation has to be a real observation by a qualified evaluator, the training behind it has to cover the topics in 29 CFR 1910.178(l)(3), and the records have to be kept current. Adapt the items to your trucks and your building, and have a qualified safety professional review your program.
- Can I edit the form?
- Yes. Print it as it is, or use it as the starting point for your own. Add the attachments, truck classes, and site rules that apply to your building, and keep the four certification facts.